The Little Wood Shop 2019

[Beekeeper1099]

This set we made sure the wedges went all the way to the front of the treads for full support and glued well. But we did glue and screw the risers to the back of the tread. Risers were also wedged in place.

[Beekeeper1099]

This is close up of routed stringer

[Beekeeper1099]

[rgfixit]

Nicely done!

Rg

[Beekeeper1099]

Thank you sir!

[MILLERMANKT]

Cutting boards look great Rg and beekeeper i like the stringer jig.
I ordered material for a small deck for our new pool.. Stairs , simple 4 x 4 deck to get in and out and railing. Over $600 ....that's insane

[iceman260]

Beekeeper nice work on the stairs. Rg nice cutting boards.

[rgfixit]

Thanks. Made some more today.
12” x 12”

8x8”

Put some of the scraps on the lathe and made a few round ones.


Super pretty wood. All finished with Watco butcher block finish.

That’s enough to sell.

Rg

[Beekeeper1099]

Rg, those look great. Is the butcher block stock 1 1/2" or thicker?

[rgfixit]

1 1/2”.

Rg

[rgfixit]

Built a ramp for my neighbor to get his tractor in and out of his shed.





 Shouldn’t blow away in the wind.

Rg

[Beekeeper1099]

I would say not. Looks to be a very solid build. I'm guessing pricey with lumber the way it is..... This has to end somewhere or I'm going to be out of a job soon. Price of sheet of 7/16 osb is now $49. This is crazy.

[MILLERMANKT]

Your a good neighbor Rg   
Beekeeper it's crazy

[rgfixit]

Bill is one neighbor I like. There’s a few around I don’t care for at all.

$90 in material for that little ramp.

Rg

[myemmy]

The price of lumber is crazy,if you can get it. Tubs, showers are no where to be found Some pluming fittings also on the list of missing.