Fishing Tackle MarCum Technologies The Fishing Tackle Superstore

Author Topic: 1992 Penn Yan Adventurer 202 $7000OBO  (Read 1526 times)


  • Sr. Member
  • ***
  • Posts: 615
1992 Penn Yan Adventurer 202 $7000OBO
« on: May 07, 2017, 05:45 AM »
3.0L Mercruiser Engine 130hp
Alpha I Gen II Outdrive
1992 Load Right - Dual axel Roller Trailer with Brakes and Bearing Buddies. Tires are 3 seasons old and are in great shape.
-Humminbird 858c FishFinder/GPS Combo
-Fish Hawk X4 System with Probe
-2x BigJon Captain's Packs Electric Downriggers with 12lb Ball Weights
-2x Chamberlin Release's
-Cannon Track System
-2x Cannon Dual Axis Rod Holders
-Cannon 30 Degree fixed rod holder down the chute
-Full Canvas Enclosure (Top needs to be replaced ASAP) Sides and Backdrop are in great shape
-Easy Troller Trolling plate
-BigJon Dual Manual Planer Mast (Manual) - Silver (Never Used)
-BigJon Pair of Otterboats (Never Used)
-25x Omish Outfitters releases
-Swim Ladder
-6 Line counter size 40 rods and reels (Magdas and Accudepths)
-4 Line Counter Okuma Convector Reels with Eagle Claw Dipsey rods with twill tips
-9' UglyStick Bigwater rod with Penn 345GTI Reel for 500' Copper (Needs Maintenence)
-Handheld Marine Radio w/ Charger
-Onboard Wash Down
-Thick aftermarket Storage cover
-Anchor and Rope
-2x life jackets
-New Water Pump/Impeller Kit this year
-New Fuel Filters this year
-New Thermostat this year
-New Mercruiser OEM Starter and Solenoid this year
-New Plugs/wires last year
-New Distributor cap and rotor last year
-New Gimbal Bearing and Bellows Last year
-Dual Batteries 2 years old
-Brand new Outdrive Trim Rams this year
-New Engine Coupler this year
Boat has some issues
-Engine doesn't run well above 4000rpm ( I haven't attempted to fix this yet) see link for Video
-Temp gauge isn't working ATM I am installing a new sending unit
-Weld in upper unit case of outdrive as seen in photos. The crack happen when one trim ram didn't extend as far as the other. This is why I replaced the rams.
-Broken keel on Outdrive
-I believe the U-joints on driveshaft could use replacing and I have the parts
James Vogel
607-592-9707 Call or text
Pictures are available upon request or at my facebook page.  Friend me!
-Mclovin out


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Sponsor
© 2004-
All Rights Reserved.