FishUSA.com Fishing Tackle The Fishing Tackle Superstore

Author Topic: how to clear simulator and set shallow water alarm  (Read 204 times)

dmeton

  • Jr. Member
  • **
  • Posts: 1
how to clear simulator and set shallow water alarm
« on: Oct 26, 2018, 02:59 PM »
My friend recently purchased a Lowrance Hook2 4x gps fish finder.  It doesn't come with a user manual.   He is asking how to clear the simulator and then how to set the shallow water depth alarm.  My first thought was that the transducer isn't hooked up.  If the unit does not receive a signal from the transducer all he will have is the simulator screen.  He says it is plugged in and the wire is not broken.

taxid

  • Sr. Member
  • ***
  • Posts: 4,045
Re: how to clear simulator and set shallow water alarm
« Reply #1 on: Oct 26, 2018, 04:37 PM »
If you type the make and model of the fish finder on google or some other search engine you should be able to read or download an owner's manual.
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

taxid

  • Sr. Member
  • ***
  • Posts: 4,045
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

taxid

  • Sr. Member
  • ***
  • Posts: 4,045
Re: how to clear simulator and set shallow water alarm
« Reply #3 on: Oct 30, 2018, 02:41 PM »
Your'e welcome.  ::)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Sponsor
© 2004- MyFishFinder.com
All Rights Reserved.